![]() Have a look at some more maintenance tips here. Keeping the rev set at 3500 RPMs provides further assistance. At this point, the light freezes, and you should put the light on the flywheel or the harmonic balancer. Make sure your car is neutral, and you can call a friend to rev the engine while you are performing the process. Let’s watch this 4 minutes video to learn how to use timing light! It happens when the spark sets fire, and it gives a signal to the light which gets into the gun, and it illuminates the number. Note: the timing light concept works on four strokes engines only and not on modern automobiles.Īfterwards, the gun displays the number as it spins so you can take a note about the spark plug firing. Now, the third clip is supposed to go with the Number-1 spark plug wire. The incorrect attachment results in wrong readings.īy now you are done with attaching both clips. This is the step that you have to do rightly on learning how to set timing with an automobile timing light. Connect the clips accordingly where the red clip goes to the positive terminal, and the black clip is for the negative terminal of the battery. ![]() Now you need to read the timing, and for this, understand the clips of the auto timing lights as the manual says. Take the key off the ignition and keep the engine shut down. To get prepared, keep the manual handy where it shows the process about adjusting the timing. This way, when you move the wheel right, you advance the timing and moving the wheel left sets the timing backward. You see the zero on the tape the number on the right side of it indicates the downward and the left side shows the upward motion of the piston. The first step on how to use a timing light, you need to first see the timing tape and what it says.
0 Comments
Leave a Reply. |